Authorised Dealer
Ignova Stove Models and Prices
Tezel Döküm · Bursa
About Ignova Stove
Ignova Stove is the stove brand of Tezel Döküm, a foundry in Bursa producing castings since 1973. Its range covers cast-iron stoves and stove accessories such as stove bases, pipe sets, tong sets and log holders. Yak Gelsin is an authorised dealer of the brand.
10 models on this page, priced ₺390 – ₺36,000 incl. VAT. Cast-iron stove: 2 (₺27,600 – ₺36,000) · Accessories: 8 (₺390 – ₺3,990).
- Manufacturer
- Tezel Döküm
- City
- Bursa
- Founded
- 1973
- Brands
- Tezel Döküm
- Manufacturer website
- ignovastove.com/
How much do Ignova Stove stoves cost?
Short answer: We list 10 Ignova Stove products, priced from ₺390 to ₺36,000 including VAT. The lowest-priced item is Ignova 13 cm Matte Anthracite Stove Pipe & Elbow. Manufacturer heat output data covers 14 kW across 1 model. We ship stoves free by cargo across Türkiye (3 days on average), and our calculator shows how many kW your home needs.
Ignova Stove Stoves and Fireplaces
2 models
Ignova Impera V1 Cast-Iron Fireplace Stove
Impera V1 is the oven-less, lower-bodied cast-iron fireplace stove of the Ignova Impera series. Manufacturer images show a firebox glazed at the front and sides, a separate loading door on the right side and two hob rings on the top plate; the wooden handles and straight cast legs are shared with the V2. Who it is for: living rooms that do not need an oven but want the heat storage and three-sided flame view of a cast-iron stove; homes where warming a pot on the top plate is enough. Known features: cast-iron body, ceramic glass, side loading door, hob rings on top (from images). Installation: as a wood stove it must connect to a properly drawing chimney; no electricity needed. The cast body is heavy; handling and floor should be planned in advance.
Ignova Impera V2 Cast-Iron Fireplace Stove with Oven
Impera V2 is Ignova Stove's cast-iron fireplace stove with a top oven. Below is a firebox showing the flame through the front and both side faces; above sits a baking oven with a dial thermometer. The body is made of EN-GJL-200 grade heavy cast iron and weighs 140 kg; that mass keeps holding heat for a while after the fire burns down. Who it is for: village houses, mountain houses and large living rooms that heat with wood and also want an oven; anyone who prefers the longevity and classic look of a cast-iron stove. Technical values (manufacturer list): 14 kW output, 70–140 m² effective heating area, Ø130 mm standard top flue outlet, three-sided ceramic glass rated to 800 °C, Airwash glass-cleaning air curtain, secondary combustion, a sliding ash drawer and wooden handles that stay cool. The manufacturer gives a 2-year warranty on the cast body. Images show wood being burned. Installation: connects from the top to a Ø130 mm chimney with suitable draught; no electricity needed. For the 140 kg unit, floor strength and the carrying route should be planned ahead, and freight/haulage delivery discussed if necessary. Installation by a fitter with chimney knowledge is recommended.
Stove comparison
Technical data is taken from the manufacturer's catalogue.
| Model | Type | Heat output (kW) | Heating area (m²) | Hopper capacity (kg) | Fuel consumption (kg/sa) | Flue diameter (mm) | Weight (kg) | Price |
|---|---|---|---|---|---|---|---|---|
| Ignova Impera V1 Cast-Iron Fireplace Stove | Cast-iron stove | — | — | — | — | — | — | ₺23,000 excl. VAT, ₺27,600 incl. VAT |
| Ignova Impera V2 Cast-Iron Fireplace Stove with Oven | Cast-iron stove | 14 kW | 70–140 m² | — | — | 130 mm | 140 kg | ₺30,000 excl. VAT, ₺36,000 incl. VAT |
Stoves in İzmir, Aydın and Muğla
We ship stoves free by cargo to the districts of these provinces and, by arrangement with you, can bring them to your door in our own vehicle; in the İzmir region we also install them. Each district has its own page.
Ignova Stove Accessories
Ignova 13 cm Matte Anthracite Stove Pipe & Elbow
The Ignova 13 cm Matte Anthracite Stove Pipe range covers 130 mm pipe and elbow pieces used to build the smoke line between stove and chimney. The manufacturer's page lists one elbow and straight pipes of 25, 33, 50 and 70 cm; all are painted matte anthracite and match the Ø130 mm outlet of the Impera series. Who it is for: users of cast-iron or sheet-steel stoves with a Ø130 mm outlet; anyone wanting a matte finish that suits the stove instead of the usual gloss black pipe. Pieces: elbow 13 cm (for direction changes), pipe 70 cm, pipe 50 cm, pipe 33 cm, pipe 25 cm. Price note: tell us the pieces and lengths you need before ordering and the unit price will be clarified. Fitting note: pipe joints should nest in the direction from stove to chimney, and horizontal runs and the number of elbows should be kept to a minimum, otherwise draught drops.
Ignova 4-Piece Cast-Iron Oval Stove & Fireplace Tool Set
The Ignova 4-piece cast-iron tool set gathers the four tools needed to tend a stove or fireplace on an oval-based stand: poker, shovel, log tongs and brush. According to the manufacturer's list the material is cast iron, the colour black, the paint rated to 800 °C, and a 2-year warranty is given. Who it is for: users of cast-iron stoves, wood stoves or open fireplaces; anyone wanting to gather the tools scattered beside the stove into one set. Dimensions: the manufacturer gives sizes only for the brush: 12.5 cm length, 4.5 cm width, 7 cm bristle length. Use note: cast tools are heavy and stay hot for a while after touching embers; gloves are advised and tools should not be left on combustible floors. Use the brush for cold ash only.
Ignova 75×75 cm Flame-Pattern Stove Floor Plate
The Flame-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with raised edges. According to the manufacturer's list it is made of 2 mm laser-cut steel and finished with oven paint; the edge is 12 cm high and laser-cut flame motifs run along it. Who it is for: anyone installing a stove on parquet, laminate or carpet; anyone wanting to keep ash and embers spilled in front of the stove in one place. Suits stoves whose footprint and leg spread fit within 75 × 75 cm. Technical: 75 cm wide, 75 cm deep, 12 cm high, 2 mm laser-cut steel, oven-painted surface, 2-year warranty. Use note: the raised edge reduces the spread of embers onto the floor but is no substitute for the safety clearance between a combustible floor and the stove; the distances in the stove manual still apply. You need to measure your stove's leg spread before buying.
Ignova 75×75 cm Deer-Pattern Stove Floor Plate
The Deer-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with a laser-cut deer and forest silhouette along its edges. According to the manufacturer's data the body is 2 mm laser-cut steel, the finish oven paint and the edge height 12 cm; the motif was chosen to suit mountain-house and bungalow interiors. Who it is for: mountain and village houses and bungalows with wooden floors; anyone wanting a stove base that matches nature-themed decor. Used with stoves whose leg spread stays within 75 × 75 cm. Technical values: width 75 cm, depth 75 cm, height 12 cm, 2 mm steel, oven-painted, 2-year manufacturer warranty. Use note: the edges keep spilled ash and embers inside; even so, the plate does not replace the combustible-floor clearances written in the stove manual. Measure the distance between the stove legs before ordering.
Ignova 75×75 cm Bridge-Pattern Stove Floor Plate
The Bridge-Pattern Stove Floor Plate is a 75 × 75 cm steel stove base whose edge decoration is an architectural bridge silhouette. Although the manufacturer's page title says "motif pattern", the URL and description state a bridge pattern, and the images show an arched bridge motif. Body 2 mm laser-cut steel, oven-painted, edge height 12 cm. Who it is for: living rooms with modern or industrial decor; anyone wanting both protection and a distinct visual detail under the stove. Suits stoves fitting within 75 × 75 cm. Technical: 75 × 75 × 12 cm, 2 mm laser-cut steel, oven-paint finish, 2-year manufacturer warranty. Use note: the plate limits the spread of ash and embers but does not by itself provide the minimum clearance between stove and combustible floor; manual clearances must be followed. Check your leg spread before ordering.
Ignova 75×75 cm Motif-Pattern Stove Floor Plate
The Motif-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with geometric laser-cut motifs along its edges. According to the manufacturer's list it has a 2 mm laser-cut steel body, an oven-painted surface and a 12 cm edge height; it is the plainest-patterned member of the range. Who it is for: anyone wanting a neutral pattern that suits both classic and modern decor; anyone setting a cast-iron or pellet stove on a wooden floor. Used with stoves that fit within 75 × 75 cm. Technical: base 75 × 75 cm, edge 12 cm; 2 mm laser-cut steel, oven paint, 2-year warranty. The manufacturer's page gives no weight. Use note: the raised edge stops spilled ash and embers before they reach the floor; still, the combustible-material clearances in the stove manual must be applied. Order after measuring your stove's leg spread.
Ignova 75×75 cm Forest-Pattern Stove Floor Plate
The Forest-Pattern Stove Floor Plate is a 75 × 75 cm steel stove base carrying laser-cut tree silhouettes along its edge. According to the manufacturer's information it is made of 2 mm laser-cut steel, finished with oven paint, and has a 12 cm edge height. Who it is for: homes in nature such as vineyard houses, mountain houses and bungalows; anyone wanting a decorative frame together with a protective area under the stove. Suits stoves whose leg spread stays within 75 × 75 cm. Technical: 75 cm × 75 cm × 12 cm, 2 mm laser-cut steel, oven-painted, 2-year manufacturer warranty. Weight has not been shared by the manufacturer. Use note: the edges help prevent embers spreading onto the floor, but the plate cannot be used in place of the safety clearance between a combustible floor and the stove; manual distances apply. Measure the spread of the stove legs before ordering.
Ignova Laser-Cut Flame-Pattern Matte Black Steel Log Holder
The Ignova Laser-Cut Log Holder is a matte black steel basket designed to keep firewood tidy and off the floor beside a stove or fireplace. Manufacturer images show flame-pattern laser-cut side panels, short feet and a wide tray where logs can be lined up; the surface is oven-painted. Who it is for: homes using cast-iron or wood stoves; anyone wanting to keep the day's firewood by the stove rather than carrying it in from outside each time. Only the material (laser-cut steel) and finish (matte black oven paint) are stated. Use note: place the log holder at a safe distance from the stove and not too close to the front of the firebox; dry wood can catch from sparks. Keep the painted surface dry before loading wet logs.
Technical data is taken from the manufacturer's catalogue.
How can I pay?
At addresses we deliver to with our own vehicles (İzmir and nearby provinces) you can pay cash or by card on delivery, or by bank transfer. Orders sent by cargo are paid by bank transfer (havale/EFT).
Do you ship across Türkiye?
Stoves and fireplaces are shipped free by cargo across Türkiye (3 days on average; payment by bank transfer). In İzmir and nearby provinces we can also bring it to your door in our own vehicle by arrangement with you; in that case you can also pay cash or by card on delivery. Other products: Shipped across Türkiye; delivery and cargo details are confirmed on WhatsApp before the order.
How many kW stove do I need?
Enter your floor area, insulation and climate zone in our calculator; it suggests a power class and shows how many kilos of pellets a month that means. Stove size calculator →
Can I return it?
Yes: you can withdraw within 14 days of delivery. The conditions and exceptions are on our returns policy page. Returns policy →
Delivery
Stoves and fireplaces are shipped free by cargo across Türkiye (3 days on average; payment by bank transfer). In İzmir and nearby provinces we can also bring it to your door in our own vehicle by arrangement with you; in that case you can also pay cash or by card on delivery. Other products: Shipped across Türkiye; delivery and cargo details are confirmed on WhatsApp before the order.