Shipped Across Türkiye
Stove & Flue Accessories
Natural Stove Erciyes Enamel Flue-Pipe Oven
The Erciyes Enamel Flue-Pipe Oven is a small oven that mounts on the stove pipe and works from the heat of the flue gas; it is used to warm bread or bake potatoes and chestnuts without burning extra fuel. The manufacturer's image shows a black enamel body, a glass front door and pipe passages top and bottom. Who it is for: homes with a wood, coal or manual pellet stove that has no oven section, and enough vertical run in the pipe. Technical status: the manufacturer's page gives no dimensions, compatible pipe diameter, weight or interior volume. These have been requested; you need to tell us your pipe diameter before ordering, otherwise fit cannot be guaranteed. Use note: the oven can reduce chimney draught somewhat; do not use it on weak-drawing chimneys. The surface gets very hot in operation. The current image is 214 × 214 pixels and not of publishable quality; a new image has been requested from the manufacturer.
Ignova 13 cm Matte Anthracite Stove Pipe & Elbow
The Ignova 13 cm Matte Anthracite Stove Pipe range covers 130 mm pipe and elbow pieces used to build the smoke line between stove and chimney. The manufacturer's page lists one elbow and straight pipes of 25, 33, 50 and 70 cm; all are painted matte anthracite and match the Ø130 mm outlet of the Impera series. Who it is for: users of cast-iron or sheet-steel stoves with a Ø130 mm outlet; anyone wanting a matte finish that suits the stove instead of the usual gloss black pipe. Pieces: elbow 13 cm (for direction changes), pipe 70 cm, pipe 50 cm, pipe 33 cm, pipe 25 cm. Price note: tell us the pieces and lengths you need before ordering and the unit price will be clarified. Fitting note: pipe joints should nest in the direction from stove to chimney, and horizontal runs and the number of elbows should be kept to a minimum, otherwise draught drops.
Ignova 4-Piece Cast-Iron Oval Stove & Fireplace Tool Set
The Ignova 4-piece cast-iron tool set gathers the four tools needed to tend a stove or fireplace on an oval-based stand: poker, shovel, log tongs and brush. According to the manufacturer's list the material is cast iron, the colour black, the paint rated to 800 °C, and a 2-year warranty is given. Who it is for: users of cast-iron stoves, wood stoves or open fireplaces; anyone wanting to gather the tools scattered beside the stove into one set. Dimensions: the manufacturer gives sizes only for the brush: 12.5 cm length, 4.5 cm width, 7 cm bristle length. Use note: cast tools are heavy and stay hot for a while after touching embers; gloves are advised and tools should not be left on combustible floors. Use the brush for cold ash only.
Ignova 75×75 cm Flame-Pattern Stove Floor Plate
The Flame-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with raised edges. According to the manufacturer's list it is made of 2 mm laser-cut steel and finished with oven paint; the edge is 12 cm high and laser-cut flame motifs run along it. Who it is for: anyone installing a stove on parquet, laminate or carpet; anyone wanting to keep ash and embers spilled in front of the stove in one place. Suits stoves whose footprint and leg spread fit within 75 × 75 cm. Technical: 75 cm wide, 75 cm deep, 12 cm high, 2 mm laser-cut steel, oven-painted surface, 2-year warranty. Use note: the raised edge reduces the spread of embers onto the floor but is no substitute for the safety clearance between a combustible floor and the stove; the distances in the stove manual still apply. You need to measure your stove's leg spread before buying.
Ignova 75×75 cm Deer-Pattern Stove Floor Plate
The Deer-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with a laser-cut deer and forest silhouette along its edges. According to the manufacturer's data the body is 2 mm laser-cut steel, the finish oven paint and the edge height 12 cm; the motif was chosen to suit mountain-house and bungalow interiors. Who it is for: mountain and village houses and bungalows with wooden floors; anyone wanting a stove base that matches nature-themed decor. Used with stoves whose leg spread stays within 75 × 75 cm. Technical values: width 75 cm, depth 75 cm, height 12 cm, 2 mm steel, oven-painted, 2-year manufacturer warranty. Use note: the edges keep spilled ash and embers inside; even so, the plate does not replace the combustible-floor clearances written in the stove manual. Measure the distance between the stove legs before ordering.
Ignova 75×75 cm Bridge-Pattern Stove Floor Plate
The Bridge-Pattern Stove Floor Plate is a 75 × 75 cm steel stove base whose edge decoration is an architectural bridge silhouette. Although the manufacturer's page title says "motif pattern", the URL and description state a bridge pattern, and the images show an arched bridge motif. Body 2 mm laser-cut steel, oven-painted, edge height 12 cm. Who it is for: living rooms with modern or industrial decor; anyone wanting both protection and a distinct visual detail under the stove. Suits stoves fitting within 75 × 75 cm. Technical: 75 × 75 × 12 cm, 2 mm laser-cut steel, oven-paint finish, 2-year manufacturer warranty. Use note: the plate limits the spread of ash and embers but does not by itself provide the minimum clearance between stove and combustible floor; manual clearances must be followed. Check your leg spread before ordering.
Ignova 75×75 cm Motif-Pattern Stove Floor Plate
The Motif-Pattern Stove Floor Plate is a 75 × 75 cm steel floor protector with geometric laser-cut motifs along its edges. According to the manufacturer's list it has a 2 mm laser-cut steel body, an oven-painted surface and a 12 cm edge height; it is the plainest-patterned member of the range. Who it is for: anyone wanting a neutral pattern that suits both classic and modern decor; anyone setting a cast-iron or pellet stove on a wooden floor. Used with stoves that fit within 75 × 75 cm. Technical: base 75 × 75 cm, edge 12 cm; 2 mm laser-cut steel, oven paint, 2-year warranty. The manufacturer's page gives no weight. Use note: the raised edge stops spilled ash and embers before they reach the floor; still, the combustible-material clearances in the stove manual must be applied. Order after measuring your stove's leg spread.
Ignova 75×75 cm Forest-Pattern Stove Floor Plate
The Forest-Pattern Stove Floor Plate is a 75 × 75 cm steel stove base carrying laser-cut tree silhouettes along its edge. According to the manufacturer's information it is made of 2 mm laser-cut steel, finished with oven paint, and has a 12 cm edge height. Who it is for: homes in nature such as vineyard houses, mountain houses and bungalows; anyone wanting a decorative frame together with a protective area under the stove. Suits stoves whose leg spread stays within 75 × 75 cm. Technical: 75 cm × 75 cm × 12 cm, 2 mm laser-cut steel, oven-painted, 2-year manufacturer warranty. Weight has not been shared by the manufacturer. Use note: the edges help prevent embers spreading onto the floor, but the plate cannot be used in place of the safety clearance between a combustible floor and the stove; manual distances apply. Measure the spread of the stove legs before ordering.
Ignova Laser-Cut Flame-Pattern Matte Black Steel Log Holder
The Ignova Laser-Cut Log Holder is a matte black steel basket designed to keep firewood tidy and off the floor beside a stove or fireplace. Manufacturer images show flame-pattern laser-cut side panels, short feet and a wide tray where logs can be lined up; the surface is oven-painted. Who it is for: homes using cast-iron or wood stoves; anyone wanting to keep the day's firewood by the stove rather than carrying it in from outside each time. Only the material (laser-cut steel) and finish (matte black oven paint) are stated. Use note: place the log holder at a safe distance from the stove and not too close to the front of the firebox; dry wood can catch from sparks. Keep the painted surface dry before loading wet logs.
Stove pipes, elbows, flue cowls, stove bases, tong sets, ash buckets, log holders, flue brushes and stove glass. Ask us on WhatsApp which size fits your stove.
Accessory Prices
| Product | Option | Price |
|---|---|---|
| Natural Stove Erciyes Enamel Flue-Pipe Oven | Standard | ₺2,291.67 excl. VAT, ₺2,750 incl. VAT |
| Ignova 13 cm Matte Anthracite Stove Pipe & Elbow | Standard | ₺325 excl. VAT, ₺390 incl. VAT |
| Ignova 4-Piece Cast-Iron Oval Stove & Fireplace Tool Set | Standard | ₺2,875 excl. VAT, ₺3,450 incl. VAT |
| Ignova 75×75 cm Flame-Pattern Stove Floor Plate | Standard | ₺3,325 excl. VAT, ₺3,990 incl. VAT |
| Ignova 75×75 cm Deer-Pattern Stove Floor Plate | Standard | ₺3,325 excl. VAT, ₺3,990 incl. VAT |
| Ignova 75×75 cm Bridge-Pattern Stove Floor Plate | Standard | ₺3,325 excl. VAT, ₺3,990 incl. VAT |
| Ignova 75×75 cm Motif-Pattern Stove Floor Plate | Standard | ₺3,325 excl. VAT, ₺3,990 incl. VAT |
| Ignova 75×75 cm Forest-Pattern Stove Floor Plate | Standard | ₺3,325 excl. VAT, ₺3,990 incl. VAT |
| Ignova Laser-Cut Flame-Pattern Matte Black Steel Log Holder | Standard | ₺3,000 excl. VAT, ₺3,600 incl. VAT |
Prices include VAT; the cargo fee is confirmed before the order.
What is each accessory for?
Stove pipe and elbow
Connects the stove to the flue. The pipe diameter must match the stove's flue outlet; every extra elbow reduces draught, so use as few as possible.
Flue cowl
Fitted to the top of the chimney; keeps rain and wind out of the flue.
Stove base
Protects the floor under the stove from sparks and heat, especially on wooden or carpeted floors.
Tong set, ash bucket and log holder
For feeding the stove, emptying the ash and keeping firewood tidy next to the stove.
Flue brush
Cleans soot from the pipe and chimney; sweeping before every season improves draught and safety.
Stove glass
Replacement door glass for glazed stoves; the size depends on the model, so send us your measurements before ordering.
How to choose the size
For pipes and elbows, check the stove's flue outlet diameter (mm); for stove glass, measure the width and height of the door glass. If unsure, send a photo of the stove's label on WhatsApp.
Delivery
Shipped across Türkiye; delivery and cargo details are confirmed on WhatsApp before the order.
Brands we are an authorised dealer of
Related pages
How much do stove accessories cost?
Short answer: We list 9 stove and flue accessories, priced from ₺390 to ₺3,990 including VAT. The lowest-priced item is Ignova 13 cm Matte Anthracite Stove Pipe & Elbow. We ship across Türkiye; delivery is confirmed on WhatsApp before the order. You can return an item within 14 days of delivery under the right of withdrawal.
9 models on this page, priced ₺390 – ₺3,990 incl. VAT.
Authorised dealer brands: Petra Şömine, Ignova Stove. Specs on each product page come from the manufacturer.
How can I pay?
At addresses we deliver to with our own vehicles (İzmir and nearby provinces) you can pay cash or by card on delivery, or by bank transfer. Orders sent by cargo are paid by bank transfer (havale/EFT).
Do you ship across Türkiye?
Shipped across Türkiye; delivery and cargo details are confirmed on WhatsApp before the order.
Can I return it?
Yes: you can withdraw within 14 days of delivery. The conditions and exceptions are on our returns policy page. Returns policy →